Memahami Standard2 @ oli mesin : API Service / ACEA / Longlife std dr MB / BMW
November 12, 2009, 10:12 PM
by A S
Hot Topics » News & Information
- A S (November 12, 2009, 10:12 PM) wrote : Dear allDewasa ini standard baku pelumas semakin beragam, tidak hanya berdasarkan API Service semata, ada beberapa standard lain yang bisa kita jadikan referensi spt ACEA serta standard Longlife dari pabrikan mobil spt MB 229.x / BMW LL-xxDi bawah ini adalah panduan pemahaman berbagai standard baku pelumas & kinerjanya thd berbagai aspek :http://sas-origin.onstreammedia.com/origin/lubrizol/EOACEA2009/RP/PC/index.htmlTerlihat sekali bahwa "tuntutan syarat kinerja pelumas" pada standard
API Service "sangatlah ringan" dibandingkan standard2 lainnya macam
ACEA A5 apalagi standard LongLife compliance dari BMW & Mercedes
Benz macam MB 229.5Sedangkan standard ILSAC GF-4 spt nya merupakan pengembangan dari API SM dimana
ILSAC GF-4 menekankan pada faktor efisiensi BBM.Standard BMW LL-01 & MB 229.5 memiliki aspek yang sgt luas, sehingga memungkinkan utk pemakaian dalam jarak yg sgt jauh / interval ganti oli yg sgt panjang.Dewasa ini pelumas2 mesin dgn standard ILSAC GF-4 makin banyak ditemukan, sementara utk pelumas2 Full Synthetic yang ditujukan utk long drain interval umumnya menyandang sertifikat2 tertentu yang tertera pada labelnya. Contoh :MB 229.3 atau MB 229.5BMW LL-98 atau LL-01VW 502 / 505GM LL-A-025Dll.Keterangan :ACEA Standard :
A1 Fuel Economy Petrol †A2 Standard performance levelA3 High performance and / or extended drainA5 Fuel economy petrol with extended drain capability †VW / Audi Standard :502.00
for high performance petrol engines, with oil change every
15,000 km
503.00
for petrol engines with prolonged interval between changes
(30,000 km), low viscosity
503.01
for petrol engines with prolonged interval between changes,
AUDI only
504.00
for Euro IV petrol enginesMB Standard :229.1
For petrol and diesel engines. Minimum quality required ACEA
A2/B2 with additional limits on engine.
229.3
For petrol and diesel engines. Minimum quality required ACEA
A3 / B3 / B4 e MB 229.1. It can only certify 0/ 5 W-x oils.
Additional tests on DB engines are foreseen.
229.31
For new generation diesel engines. For lubricants with mid
SAPS characteristic and SAE 5W-30 grade.
229.5
Maximum change interval 50,000 KM. Minimum quality required
ACEA A3 / B3 / B4. It can only certify 0/5 /l0 W-30 /40/50 oils.
It is used for the new MB cars with ASSYST system (based on
number of ignitions, engine operating time, mileage and type
of lubricant).BMW Standard :"BMW Long Life Oils" 1998
The minimum requirement is A3/B3 and it can be coupled with the
following viscosimetric grades: 0W/5W/10W-30/40. The oils that pass
test M44, allow extended change intervals, up to 20,000 Km or two
years.
"BMW Long Life" 2001
The minimum requirement is ACEA A3/B3 and the viscosimetric grades
that can indicate this specification are 0W/5W/10W-30/40. Test M44
in the new version, warrants oil change intervals of up to 20/40,000
Km or two years. It is compulsory for the new cars that require
Long Life 01 and can replace the previous ones.Sumber :www.carbibles.comhttp://www.flitalia.it/en/fl/manuale/en/omot_010503.htm(Bersambung)